ON THE BOEING FRONT
Boeing Selects CTT for 777X Humidification Systems
CTT Systems has been selected by Boeing to provide the humidification systems for flight deck, crew rests and cabin zone A/B for the Boeing 777X aircraft. CTT will be tier-1 supplier to Boeing and the CTT products will be offered as supplier furnished equipment in the 777X catalog.
CTT Systems AB, headquartered in Nykoping, Sweden and listed on the Small Cap of OMX Nordic Exchange Stockholm AB, is the leading provider of aerospace products for active humidity control: inside the aircraft cabin-for increasing humidity-and in aircraft structures- for preventing condensation.
Selecting CTT enables Boeing to bring humidification capabilities and performance from the 787 to the 777X and migrate to premium passenger cabins (zone A and B). In total, the Boeing 777X aircraft can be equipped with five humidifiers.
The 777X will be the largest and most efficient twin-engine in the world, with 12 percent lower fuel consumption and 10 percent lower operating costs than the competition.
CTT’s humidifier maintains relative humidity in the human comfort zone, 20 percent Relative Humidity. A higher humidity on long-haul flights reduces dry air related problems (e.g. fatigue, jet-lag, red eyes, dry skin, spread of virus diseases) and improves wellbeing and sleep. The humidifier is baed on evaporative cooling technology and uses a method that effectively precludes the transfer of bacteria.
Source : Arabian Aerospace/Boeing
ON THE AIRBUS FRONT
Airbus Prepares Beluga XL Core for Integration
Airbus has assembled the basic core airframe of the initial BelugaXL high-capacity transport designed to replace the A300-600ST logistics fleet.
The airframes, based on an A330-200 freighter with reinforcements, was assembled in December of 2016; but has yet to be mated with its nose or tail sections.
These sections will be added this year, the manufacturer states, as an 18 month integration process commences. Beluga XL program head Bertrand George says the final integration will be “a series of small steps”.
“The Number of holes to be drilled and fasteners to be installed is far bigger than on any other Airbus aircraft”. He says. “Sticking to schedule at each step is the key to being ready for first flight in 2018.”
Over the initial 12 months of the assembly, the airframe will be completed and fitted with mechanical and electrical components. The final six months will involve transferring the aircraft to a new station for Rolls-Royce Trent 700 engine installation and Ground testing.
Airbus is renewing the logistics fleet with five Beluga XLs to meet demand for A350 assembly. The Beluga XL will enter service in 2019.
Source : Flightglobal/Airbus
REGIONAL/BUSINESS JETS
MRJ Delay Confirmed; System Revision Cited
Mitsubishi Heavy Industries, the parent of Mitsubishi Aircraft Corp., has made official a further two year delay in the Mitsubishi Regional Jet (MRJ) program.
Mitsubishi said on January 23, that the first delivery of the MRJ90 to Japan’s All Nippon Airways (ANA) would be pushed back to mid-2020 from mid-2018; meaning first delivery will be nearly seven years later than what was planned in the program’s original timetable.
Four MRJ90 flight test aircraft are currently flying, with a fifth slated to join flight testing this year.
The Latest delay is necessary because of “revisions to certain systems and electrical configurations on the aircraft to meet the latest requirements for certification,” “the design changes will not effect aircraft performance, fuel consumption of functionality of systems” Mitsubishi said.
MRJ certification is now targeted for the second half of 2019.The company aims to achieve world class commercial aircraft development through integrated work between global and Japanese experts.
Source : Mitsubishi Aircraft Corp./Photo Mitsubishi Aircraft Corp.
OTHER AVIATION NEWS
GE9X Spools Up for Second Test Phase
Testing of the largest turbofan aircraft engine in history will enter a new phase later this year. Until now, GE Aviation has used the first engine to test (FETT) to validate design and performance assumptions.
With the second engine to test now in final assembly, GE is poised to begin a one -year cycle of trials required to earn airworthiness certification by the US Federal Aviation Administration.
Although based on the architecture of the GE90, the GE9X sets new boundaries for the industry in terms of size-notably its 134in (340cm) fan diameter-pressure ratio (a claimed 61.1 margin at top of climb) and application of new materials, including the spread of ceramic matrix composites (CMC) to turbine nozzle guide vanes and combust or liners.
It also improves on the strength of the carbon fiber construction of the fan blades, allowing GE to assign only 16 blades for each engine, despite a 6in wider diameter compared with the 22 fan blades found on the GE90.
Each new feature in the GE9X must be validated as being as safe or better than the proven engine technology already in service, while still meeting performance promises such as a 10% reduction in fuel burn against the GE90.
And it must be proved ready on a tight schedule: Boeing plans to begin deliveries of the first GE9X powered 777-9 by early 2020, which implies a system-level, Part 25 airworthiness certification in late 2019 and an engine-level, Part 33 certification in 2018.
Source : Flightglobal/GE Aviation
Southwest Jockeys with Norwegian for 737 Max Launch Title
Southwest Airlines chief executive Gary Kelly says the carrier will be the launch customer of the Boeing 737 Max “regardless of when we take the first delivery”, even as Norwegian prepares to be the first operator.
Kelly cites the Dallas-based carrier’s extensive involvement with Boeing on the development and testing of the latest generation of the venerable narrow body, as the rationale behind his comment during a quarterly earnings call today.
Southwest is the launch customer of the Max, placing the first order in December 2011. Norwegian placed its 737 Max order a month later in January 2012.
Southwest reaffirms that it will not debut the 737 Max 8 on scheduled flights until the end of the third quarter, when all its 737-300 and -500 aircraft, or classics, are retired. ”We don’t really need the 737 Max for flying until October 1,” says Kelly.
“Norwegian will now be the first airline to take delivery of the 737 Max, and will be the first airline in the world to operate this brand-new aircraft type,” spokesman for Norwegian says.
The jockeying between Norwegian and Southwest sets up a race between the two carriers to see who will take the first 737 Max, with the odds likely on the latter due to its placing the first order and heavy involvement in the program.
Lion Air, Norwegian and Southwest are all scheduled to take their first Max 8s in May, the Flight Fleet Analyzer shows. In addition,China Eastern Airlines, FlyDubai and WestJet are scheduled to take their first of the type before the end of September.
Source : Flightglobal
LATEST NEWS
- Flynas, Saudi Arabia’s leading low-cost carrier, has signed an agreement with Airbus for 60 A320neo Family aircraft
- Juneyao Airlines has announced an order for 10 Boeing 787-9s, comprising five firm orders and five options. The aircraft will facilitate the Shanghai-based carrier’s rapid international expansion.
- SpiceJet sealed a deal worth $10 billion with Boeing for 100 737 Max aircraft.
- Air Baltic, the Latvian carrier has received its second Bombardier CS300 aircraft after becoming the launch customer for the larger CSeries variant.
- Trade Air, the Croatian Charter, carrier received its first Airbus A320, a former SATA international example.
- Delta Airlines has taken delivery of its first US-built Airbus A321. The jet N314DN (c/n 7281),was delivered from Mobile, Alabama, plant to Minneapolis, St Paul last December.
- Arik Air of Nigeria has scrapped a longstanding order for two Boeing 747-8Is, replacing it with a pair of Boeing 787-9s.
- China Aircraft Leasing Group (CALC) signed a long term lease with Thai AirAsia for one Airbus A320, which is expected to be delivered this year.
- Avolon, the Irish lessor, delivered one Boeing 737-800 to Malaysia-based Malindo Air. This is the forth Avolon aircraft on lease to Malindo.
- Ukraine International Airlines has taken delivery of the first of six Boeing 737-800s, which are scheduled to join the fleet this year.
AIR CARGO
Crustaceans Crush 2016, Leading to 4.1 % Cargo Rise at Halifax
Thanks to a booming year for lobster, Halifax Stanfield International Airport (YHZ) saw substantial cargo growth in 2016, processing more than 33,000 tons of cargo, up 4.1 percent over 2015. An estimated US$187 million in seafood exports were shipped last year, an increase of approximately $40 million from 2015. As demand for lobster and other high-value seafood grows in markets such as Asia, Halifax Stanfield International Airport expects continued growth in seafood exports.
Yangtze River Express Airlines was the latest cargo carrier to add services to Halifax Airport and take advantage of the lobster export season earlier this month.
The Chinese carrier operated five 747-400 F cargo flights between Canada and China since the first of the 2016 calendar year.
Passenger numbers were up as well, and bellyhold cargo is an important part of the story. Compared to the previous year, the 2016 passenger numbers were up 5.6 percent, said Joyce Carter, Halifax International president and CEO. ”We are set to hit 4 million passengers in 2017.”
The airport is Atlantic Canada’s busiest full-service airport, with cargo connectivity to markets across Canada, the United States, the Caribbean Basin, Europe and Asia. The airport processes cargo worth more than $447 million each year.
Source : Air Cargo World
MRO NEWS
GECAS Asset Management Services Aquires 737NG Inventory
GECAS Asset Management Services has entered an agreement with Air Berlin to acquire the airline’s entire inventory of 737NG spares including both rotables and expendables.
“Most components will be available for immediate shipment to our customers,” says Stefan Hayes, global commercial leader for GECAS Asset Management Services.
“We will soon have everything,nose to tail,that an operator of this popular aircraft type needs.This purchase represents an exciting opportunity for GECAS AMS to continue our relationship with Air Berlin while bolstering our 737NG stock and increasing our service capability.”
The material will be located at Asset Management Service’s warehouse locations in the U.S.,UK and Singapore.
Source : MRO network.com
Qantas Unveils $30 Million Maintenance Hanger for Its A380s
Qantas Airways unveiled a new $30 million hanger at Los Angeles International Airport, big enough to hold and perform maintenance on its A380s.
The hanger, the only facility in the U.S. designed specifically to hold the behemoth plane, was touted as signaling the airline’s commitment to Los Angeles as well to travelers making long-haul flights between the US and Australia.
“This is a win-win opportunity,” said Los Angeles Mayor Eric Garcetti, who attended a ribbon-cutting ceremony for the facility on Friday, January 27th.
The Hanger is 480 feet by 370 feet and 12 stories tall, big enough to hold four passenger jets.The facility replaces a smaller 1950s-era hanger.
Qantas flies 40 flights per week between Los Angeles and Sydney, Melbourne and Brisbane, Australia, primarily using A380s and Boeing 747 jets.
Qantas Group Chief Executive Alan Joyce, said the new hanger will make maintenance 20% more efficient because it allows more planes to fit the facility at the same time. When Qantas wanted to work on an A380 in the old, smaller hanger, most of the plane would not fit inside, he said.
Joyce said that Qantas also plans to rent out the facility to other carriers at LAX.
Source : Los Angeles Times/ Photo Qantas
Researched and Compiled by : Ed Kaplanian
Commercial Aviation Advisor
Contact – ekaplanian@msn.com
KAPLANIAN REPORT 