Juneyao Airlines

by

Volume 4 Issue 3 March 2017

ON THE BOEING FRONT

Boeing Launches New Nacelle & Flight-Control  Surface Exchange Program                             

On February 8th, Boeing announced the launch of a new Nacelle and Flight-control Surface Exchange Program. It provides airlines an integrated and economical solution, while building on Boeing’s successful history of exchange programs.

Under the program, customers can exchange nacelle and flight-control surface parts that need repair or overhaul from a certified pool that Boeing maintains throughout its global network. This eliminates the need for customers to contract, schedule, manage and own or lease these parts.

Parts distributed through the program represent all Boeing models and are updated to the latest configurations, incorporating all applicable service bulletins and airworthiness directives.

Another benefit of an exchange is that customers only need to take an airplane out of service once, reducing maintenance needs. When a similar part is leased, the plane must be taken out of service for both removal and installation.

Boeing is a leader in providing 24/7 support and service to the global aviation industry. Boeing’s parts portfolio is the most complete in the industry, with total stock of over 400,000 part numbers and over 10,000 parts shipped daily.

Source : Boeing Commercial Services

                      

ON THE AIRBUS FRONT

A330neo First Flight Date is Still Not Set

Rolls-Royce is progressing with the assembly of the initial flight-test Trent 7000 engines for the Airbus A330neo, although a maiden flight date has yet to become clear.

The engine manufacturer, in its full-year financial presentation, gave the entry-into-service date for the aircraft as the first half of 2018.  TAP Portugal, the initial operator, has previously indicated that it expects to receive the first A330neo in the first quarter of that year.

Rolls-Royce has not clarified whether the difference in phrasing is indicative of a further slip to the schedule, but its use of “first half” for the entry-into-service timeframe is similar to that voiced by Airbus commercial aircraft chief Fabrice Bregier in January.

Bregier had mentioned that TAP planned services in “Spring 2018” and that the A330neo development effort was “compatible” with this.

Rolls Royce has already conducted ground tests of the power plant and says assembly of the first flight-test engines is continuing.

Chief Warren East stated, during a briefing on the company’s full-year results, that the Trent 1000-TEN for the Boeing 787 was on schedule for service entry in the second half of this year, as was the Trent XWB-97 engine on the Airbus A350-1000. As to the new A330neo with the Trent 7000 engine, that it is about six months behind.

The engine will not be installed on a testbed aircraft but fitted straight to an A330neo certification airframe.

Source : Airbus/Rolls-Royce/Picture Airbus           

        

REGIONAL/BUSINESS JETS

G500 & G600 Flight Test Campaigns Progress As G650/ER             Gets Chinese Approval                                                 

The flight-test campaigns for Gulfstream’s clean-sheet G500 and G600 are progressing well, with both models on course to meet their certification and entry-into-service targets.

The five aircraft in the G500 program have flown more than 2,000h across 500 flights, Gulfstream says. Customer deliveries of the large-cabin, long-range aircraft are scheduled to begin shortly after airworthiness certification, which is slated for the fourth quarter.

The larger and longer-range G600 is pegged for service entry about 12 months later. Since making its maiden sortie in December 2016, the first, and so far only, flight-test aircraft has accumulated more than 100h.  It will be joined in the next weeks by two additional prototypes.

Announced in 2014, the G500 and G600 designed with Gulfstream’s widest-ever cabin, Pratt & Whitney Canada PW800 engines, fly-by-wire controls and an industry-first application of active control sidesticks in commercial aircraft.

Meanwhile, Gulfstream has secured certification for its flagship G650 and G650ER from the Civil Administration of China (CAAC), allowing the US framer to start delivering B-registered versions of the ultra-long range business jets.

Source : Flightglobal/Gulfstream/Gulfstream Photo

                                                                       

OTHER AVIATION NEWS

JetBlue Introduces Special Embraer E190 Livery

JetBlue Airways has rolled out a special Embraer E190 livery and new tail fin design that will appear on multiple aircraft this year. The New York-based airline said is introducing the new paint schemes as it celebrates its 17th anniversary last month.

According to a JetBlue statement, the carrier “has a long tradition of adding unique, special liveries to its Airbus A320 fleet and that tradition is expanding to the E190 fleet.” The paint scheme showcases the so-called “bones” of the 100-seat aircraft.

“Drawing upon the styles of various aviation, nautical and space exploration vehicle cutaway diagrams, the Jet Blue design team created a mechanical x-ray of sorts infused with some JetBlue fun,” the carrier said in a statement.

Source : JetBlue/JetBlue Embraer E190

 

CFM International Bookings up 25% in 2016

CFM International booked orders for 2,677 engines in 2016, a 25.4% increase over 2,135 engines ordered in 2015.

Total value for CFM’s 2016 orders neared $36 billion at list prices, a 33.3% rise over 2015.

In 2016, CFM reported orders for 1,801 LEAP engines, including commitments and spares, up 28.7% from 1,399 orders of the engine type in 2015.Orders for CFM56 engines from Commercial, military and spare parts customers totaled 876, up 19% from 2015.

The Ohio-based manufacturer said it produced 1,665 CFM56 engines and 77 LEAP engines in 2016, with the Leap-1A making its entry into commercial service on an A320neo with Turkey’s Pegasus Airlines in August 2016.

CFM’s LEAP-1A is an engine option for Airbus A320neo family aircraft: the LEAP-1B is the sole engine behind Boeing’s 737 MAX aircraft: and the LEAP-1C is the sole Western engine for the COMAC C919.

To date, CFM is reporting more than 12,200 LEAP engine orders and commitments (excluding options), valued at over $170 billion at list prices.

Source : CFM International/Flightglobal

 

Air Lease Corp. 2016 Net Profit Up 48% to $375 million

Los Angeles-based commercial aircraft lessor Air Lease Corp.(ALC) posted a 2016 net profit of $374.9 million, up 48% from $253.4 million net income in 2015.  ALC’s total revenues for the year were $1.4 billion, up over $1.2 billion in 2015.

The company’s expenses totaled $838.8 million, up 1.1%; operating income was $580.2 million, up 47.7% over $393 million in 2015.

In 2016, ALC signed lease agreements for 122 aircraft with 39 customers, ending the year with a net book value of $12 billion in aircraft with a weighted average age of 3.8 years and weighted average lease term remaining of 6.9 years.

As of December 31, 2016, ALC’s fleet totaled 237 owned aircraft(three less than 2015), and 30 managed aircraft (up one from 2015).  During the year, ALC took delivery of 43 aircraft from its order book and sold 46 aircraft from its operating lease portfolio.

By the end of the year, ALC had sold all 19 of its remaining ATR 42/72-600 aircraft, plus 15 Embraer E190s and five E175s, to Danish regional lessor Nordic Aviation Capital(NAC) for $1.2 billion. The remaining five E175s will be sold to NAC during the first quarter of this year.

Source : ATW     

LATEST NEWS

  • Korean Air has taken delivery of its first Boeing 787-9, making it the first airline in the country to operate the type.

  • Qantas has unveiled the new premium economy seat that will fitted on its Boeing 787-9s, which it says offers more recline and width over its current product.

  • China Eastern Airlines will add four Boeing 777-300ERs and seven Airbus A330-300s to its fleet this year.

  • China Southern has agreed to lease five Boeing 787-9s from Air Lease Corp.(ALC), the Los Angeles -based Lessor said.
  • Boeing Rolls Out First 787-10 February 23rd was a momentus day for Boeing. It has rolled out its first 787-10 from the paint hanger at Boeing South Carolina. The Dreamliner has booked 1,207 from 67 customers around the world taking only 13 years to do it. Over 140.2 million have flown the aircraft and opened 120 routes.

  • Juneyao Airlines has finalized its order for five 787-9 Dreamliners valued at about $1.32 billion at current list prices.The order also includes options for five more 787-9s.

  • CFM International named Gael Meheust president and CEO, from Feb.1. The Ohio-based commercial engine manufacturer is co-owned by GE and Safran Aircraft Engines.
  • Singapore Airlines has announced its commitment to purchase 20 777-9s and 19 787-10 Dreamliners.
  • Airbus A380 two of Airbus’s A380 test aircraft are to be transferred to museums  along with two other testbeds including the first A320.

 

AIR CARGO

   Asia-Pacific Air Cargo Markets Start 2017 on Strong Footing

Preliminary January traffic figures from the Association of Asia Pacific Airlines (AAPA) showed strong traffic volumes in both international air passengers and air cargo markets. International air cargo demand, measured in freight ton kilometers (FTK), grew by 4.7 percent.  Offered freight capacity expanded by 3.8 percent, resulting in a 0.5 percentage-point rise in the international load factor to 59.4 percent for the month.

That said, January cargo traffic is an unreliable indicator of larger trends, the combined January/February results will be better indicative of underlying demand.

Andrew Herdman, AAPA’s director general said, ”The year started on an encouraging note for Asian carriers, with both international air passenger and cargo markets growing strongly, boosted by the timing of the lunar New Year holidays.”

Herdman also noted that the outlook for the rest of the year looks “broadly positive, against a backdrop of renewed optimism”.

Source : Air Cargo World

 

Lockheed Rolls out First LM-100J Super Hercules Commercial Freighter

On February 9, 2017, Lockheed Martin officially the world to the latest member of the C-130J Super Hercules family: the LM-100J commercial freighter.

Employees who designed and built the aircraft celebrated this new Super Hercules with a traditional “rollout” ceremony held at the Lockheed Martin Aeronautics facility located in Marietta, Ga. Team members walked the LM-100J out of the building that is the home to the Super Hercules production line. The  next stop for this milestone Super Hercules is the flightline, where it will prepare for its first flight this spring.

Lockheed Martin announced its intent to manufacture and market the LM-100J in February 2014. Lockheed Martin has filed for an FAA civil type certificate update and this first LM-100J will participate in flight test activity to support this process.

The LM-100J is the updated version of the L-100 Hercules, which was built by Lockheed Martin from 1964-1992.  More than 100 L-100s were delivered to both commercial and government operators, supporting cargo delivery requirements in almost every operating environment in the world. At the Farnborough Airshow in 2014, ASL Aviation Group signed a letter of Intent with Lockheed Martin to order up to 10 LM100J Super Hercules commercial freighters.

Source : Lockheed Martin/Lockheed Martin Photo

       

 

       MAINTENANCE, REPAIR, OVERHAUL

A European First For Icelandair

Icelandair has become the first airline in Europe to install and operate Aviation Partners Boeing’s Scimitar Blended Winglets (SBWs) on Boeing 757-200s.

Icelandair is retrofitting the SBWs to its 757-200s as an enhancement to the 757-200 blended winglets which are already installed on its aircraft.

The Carrier expects the new winglets to increase savings in block fuel, to reduce engine maintenance, to improve take-off performance and reduce engine emissions, as well as to provide other benefits, according to Aviation Partners Boeing (APB), which is the Seattle based joint venture of Aviation Partners Inc. and The Boeing Company.

Icelandair is now working on its fourth Scimitar Blended Winglet modification and plans to have a total of 17 aircraft in service with the new mods retrofitted before the 2017 summer season.

Source : MRO Network/Icelandair Photo

Safran Nacelles Establishes MRO Center of Excellence

Safran subsidiary, Safran Nacelles, has established an MRO Center of Excellence at its Pont-Audemer facility in the Normandy region of France. It will strengthen its expertise in and capabilities for maintenance, repair and overhaul (MRO) of complete nacelle systems and nacelle components.

The New Center of Excellence will be responsible for managing Safran Nacelles’ global network of MRO facilities. It will serve as the company’s operational reference for repair procedures and MRO industrialization for all of Safran Nacelles’ facilities.

The MRO Center of Excellence’s expertise will cover complete engine nacelle systems, including complex structural repairs, line replaceable units, engine sub-assemblies, outlet guide vanes and on-site support, according to Safran Nacelles.

Behind UTC Aerospace Systems, Safran Nacelles is the world’s second largest supplier of aircraft engine nacelles, boasting more than 17,000 nacelle systems in service, which accumulate more than 100,000 flight-hours each day.

Source : Avweek.com

 

MRO Short News

  • STS Repair and Modification was formed by STS Aviation Group and Cannon aviation to provide aircraft structural repair and modification services.
  • Lufthansa Technik and MTU Aero Engines finalized a previously announced deal to set up a joint venture for PW1000G(GTF) maintenance, repair and overhaul starting in 2020, at a yet-to-be announced location.
  • Magnetic MRO acquired an AirBaltic contract to provide Bombardier Q400/CS300 wheel and brake maintenance.

          

Researched and Compiled by : Ed Kaplanian

Commercial Aviation Advisor

Contact – ekaplanian@msn.com

by

Volume 4 Issue 2 February 2017 The Kaplanian Report

ON THE BOEING FRONT

Boeing Selects CTT for 777X Humidification Systems

CTT Systems has been selected by Boeing to provide the humidification systems for flight deck,  crew rests and cabin zone A/B for the Boeing 777X aircraft.  CTT will be tier-1 supplier to Boeing and the CTT products will be offered as supplier furnished equipment in the 777X catalog.

CTT Systems AB, headquartered in Nykoping, Sweden and listed on the Small Cap of OMX Nordic Exchange Stockholm AB, is the leading provider of aerospace products for active humidity control: inside the aircraft cabin-for increasing humidity-and in aircraft structures- for preventing condensation.

Selecting CTT enables Boeing to bring humidification capabilities and performance from the 787 to the 777X and migrate to premium passenger cabins (zone A and B). In total, the Boeing 777X aircraft can be equipped with five humidifiers.

The 777X will be the largest and most efficient twin-engine in the world, with 12 percent lower fuel consumption and 10 percent lower operating costs than the competition.

CTT’s humidifier maintains relative humidity in the human comfort zone, 20 percent Relative Humidity. A higher humidity on long-haul flights reduces dry air related problems (e.g. fatigue, jet-lag, red eyes, dry skin, spread of virus diseases) and improves wellbeing and sleep. The humidifier is baed on evaporative cooling technology and uses a method that effectively precludes the transfer of bacteria.

Source : Arabian Aerospace/Boeing

                      

ON THE AIRBUS FRONT

Airbus Prepares Beluga XL Core for Integration

Airbus has assembled the basic core airframe of the initial BelugaXL high-capacity transport designed to replace the A300-600ST logistics fleet.

The airframes, based on an A330-200 freighter with reinforcements, was assembled in December of 2016; but has yet to be mated with its nose or tail sections.

These sections will be added this year, the manufacturer states, as an 18 month integration process commences.  Beluga XL program head Bertrand George says the final integration will be “a series of small steps”.

“The Number of holes to be drilled and fasteners to be installed is far bigger than on any other Airbus aircraft”.  He says. “Sticking to schedule at each step is the key to being ready for first flight in 2018.”

Over the initial 12 months of the assembly, the airframe will be completed and fitted with mechanical and electrical components.  The final six months will involve transferring the aircraft to a new station for Rolls-Royce Trent 700 engine installation  and Ground testing.

Airbus is renewing the logistics fleet with five Beluga XLs to meet demand for A350 assembly. The Beluga XL will enter service in 2019.

Source : Flightglobal/Airbus

 

REGIONAL/BUSINESS JETS

 MRJ Delay Confirmed; System Revision Cited 

Mitsubishi Heavy Industries, the parent of Mitsubishi Aircraft Corp., has made official a further two year delay in the Mitsubishi Regional Jet (MRJ) program.

Mitsubishi said on January 23, that the first delivery of the MRJ90 to Japan’s All Nippon Airways (ANA) would be pushed back to mid-2020 from mid-2018; meaning first delivery will be nearly seven years later than what was planned in the program’s original timetable.

Four MRJ90 flight test aircraft are currently flying, with a fifth slated to join flight testing this year.

The Latest delay is necessary because of “revisions to certain systems and electrical configurations on the aircraft to meet the latest  requirements for certification,” “the design changes will not effect aircraft performance, fuel consumption of functionality of systems” Mitsubishi said.

MRJ certification is now targeted for the second half of 2019.The company aims to achieve world class commercial aircraft development through integrated work between global and Japanese experts.

Source : Mitsubishi Aircraft Corp./Photo Mitsubishi Aircraft Corp.

 

OTHER AVIATION NEWS

 GE9X Spools Up for Second Test Phase

Testing of the largest turbofan aircraft engine in history will enter a new phase later this year. Until now, GE Aviation has used the first engine to test (FETT) to validate design and performance assumptions.

With the second engine to test now in final assembly, GE is poised to begin a one -year cycle of trials required to earn airworthiness certification by the US Federal Aviation Administration.

Although based on the architecture of the GE90, the GE9X sets new boundaries for the industry in terms of size-notably its 134in (340cm) fan diameter-pressure ratio (a claimed 61.1 margin at top of climb) and application of new materials, including the spread of ceramic matrix composites (CMC) to turbine nozzle guide vanes and combust or liners.

It also improves on the strength of the carbon fiber construction of the fan blades, allowing GE to assign only 16 blades for each engine, despite a 6in wider diameter compared with the 22 fan blades found on the GE90.

Each new feature in the GE9X must be validated as being as safe or better than the proven engine technology already in service, while still meeting performance promises such as a 10% reduction in fuel burn against the GE90.

And it must be proved ready on a tight schedule: Boeing plans to begin deliveries of the first GE9X powered 777-9 by early 2020, which implies a system-level, Part 25 airworthiness certification in late 2019 and an engine-level, Part 33 certification in 2018.

Source : Flightglobal/GE Aviation

 

Southwest Jockeys with Norwegian for 737 Max Launch Title

Southwest Airlines chief executive Gary Kelly says the carrier will be the launch  customer of the Boeing 737 Max “regardless of when we take the first delivery”, even as Norwegian prepares to be the first operator.

Kelly cites the Dallas-based carrier’s extensive involvement with Boeing on the development and testing of the latest generation of the venerable narrow body, as the rationale behind his comment during a quarterly earnings call today.

Southwest is the launch customer of the Max, placing the first order in December 2011. Norwegian placed its 737 Max order a month later in January 2012.

Southwest reaffirms that it will not debut the 737 Max 8 on scheduled flights until the end of the third quarter, when all its 737-300 and -500 aircraft, or classics, are retired.  ”We don’t really need the 737 Max for flying until October 1,” says Kelly.

“Norwegian will now be the first airline to take delivery of the 737 Max, and will be the first airline in the world to operate this brand-new aircraft type,” spokesman for Norwegian says.

The jockeying between Norwegian and Southwest sets up a race between the two carriers to see who will take the first 737 Max, with the odds likely on the latter due to its placing the first order and heavy involvement in the program.

Lion Air, Norwegian and Southwest are all scheduled to take their first Max 8s in May, the Flight Fleet Analyzer shows.  In addition,China Eastern Airlines, FlyDubai and WestJet are scheduled to take their first of the type before the end of September.

Source : Flightglobal     

LATEST NEWS

  • Flynas, Saudi Arabia’s leading low-cost carrier, has signed an agreement with Airbus for 60 A320neo Family aircraft

  • Juneyao Airlines has announced an order for 10 Boeing 787-9s, comprising five firm orders and five options.  The aircraft will facilitate the Shanghai-based carrier’s rapid international expansion.
  • SpiceJet sealed a deal worth $10 billion with Boeing for 100 737 Max aircraft.

  • Air Baltic, the Latvian carrier has received its second Bombardier CS300 aircraft after becoming the launch customer for the larger CSeries variant.
  • Trade Air, the Croatian Charter, carrier received its first Airbus A320, a former SATA international example.
  • Delta Airlines has taken delivery of its first US-built Airbus A321.  The jet N314DN (c/n 7281),was delivered from Mobile, Alabama, plant to Minneapolis, St Paul last December.
  • Arik Air of Nigeria has scrapped a longstanding order for two Boeing 747-8Is, replacing it with a pair of Boeing 787-9s.
  • China Aircraft Leasing Group (CALC) signed a long term lease with Thai AirAsia for one Airbus A320, which is expected to be delivered this year.
  • Avolon, the Irish lessor, delivered one Boeing 737-800 to Malaysia-based Malindo Air. This is the forth Avolon aircraft on lease to Malindo.
  • Ukraine International Airlines has taken delivery of the first of six Boeing 737-800s, which are scheduled to join the fleet this year.

 

AIR CARGO

Crustaceans Crush 2016, Leading to 4.1 % Cargo Rise at Halifax 

Thanks to a booming year for lobster, Halifax Stanfield International Airport (YHZ) saw substantial cargo growth in 2016, processing more than 33,000 tons of cargo, up 4.1 percent over 2015.  An estimated US$187 million in seafood exports were shipped last year, an increase of approximately $40 million from 2015.  As demand for lobster and other high-value seafood grows in markets such as Asia, Halifax Stanfield International Airport expects continued growth in seafood exports.

Yangtze River Express Airlines was the latest cargo carrier to add services to Halifax Airport and take advantage of the lobster export season earlier this month.

The Chinese carrier operated five 747-400 F cargo flights between Canada and China since the first of the 2016 calendar year.

Passenger numbers were up as well, and bellyhold cargo is an important part of the story. Compared to the previous year, the 2016 passenger numbers were up 5.6 percent, said Joyce Carter, Halifax International president and CEO.  ”We are set to hit 4 million passengers in 2017.”

The airport is Atlantic Canada’s busiest full-service airport, with cargo connectivity to markets across Canada, the United States, the Caribbean Basin, Europe and Asia.  The airport processes cargo worth more than $447 million each year.

Source : Air Cargo World

 

  MRO NEWS

 GECAS Asset Management Services Aquires 737NG Inventory

GECAS Asset Management Services has entered an agreement with Air Berlin to acquire the airline’s entire inventory of 737NG spares including both rotables and expendables.

“Most components will be available for immediate shipment to our customers,” says Stefan Hayes, global commercial leader for GECAS Asset Management Services.

“We will soon have everything,nose to tail,that an operator of this popular aircraft type needs.This purchase represents an exciting opportunity for GECAS AMS to continue our relationship with Air Berlin while bolstering our 737NG stock and increasing our service capability.”

The material will be located at Asset Management Service’s warehouse locations in the U.S.,UK and Singapore.

Source : MRO network.com

    

Qantas Unveils $30 Million Maintenance Hanger for Its A380s   

636213810462889315-qantas-a380-in-new-lax-hangar                               

Qantas Airways unveiled a new $30 million hanger at Los Angeles International Airport, big enough to hold and perform maintenance on its A380s.

The hanger, the only facility in the U.S. designed specifically to hold the behemoth plane, was touted as signaling the airline’s commitment to Los Angeles as well to travelers making long-haul flights between the US and Australia.

“This is a win-win opportunity,” said Los Angeles Mayor Eric Garcetti, who attended a ribbon-cutting ceremony for the facility on Friday, January 27th.

The Hanger is 480 feet by 370 feet and 12 stories tall, big enough to hold four passenger jets.The facility replaces a smaller 1950s-era hanger.

Qantas flies 40 flights per week between Los Angeles and Sydney, Melbourne and Brisbane, Australia, primarily using A380s and Boeing 747 jets.

Qantas Group Chief Executive Alan Joyce, said the new hanger will make maintenance 20% more efficient because it allows more planes to fit the facility at the same time.  When Qantas wanted to work on an A380 in the old, smaller hanger, most of the plane would not fit inside, he said.

Joyce said that Qantas also plans to rent out the facility to other carriers at LAX.

Source : Los Angeles Times/ Photo Qantas

                       

Researched and Compiled by : Ed Kaplanian

Commercial Aviation Advisor

Contact – ekaplanian@msn.com